What pitch prop would work on my boat? - ss prop
I have a stalker with mercury to 18.5 Proline 2000 125. I want a SS prop.Hope someone can help me go?
Wednesday, January 6, 2010
Ss Prop What Pitch Prop Would Work On My Boat?
Subscribe to:
Post Comments (Atom)
5 comments:
Many good answers, and 45 cal has the best.
His current term must be a pillar of 13 "right hand with a field of 19. I recommend you stay with your current up the proposal, if it works for you.
Good luck, and boat insurance!
As for solving a performance problem?
Improving high, want more land.
Get the best picture that you want less.
This is a trade-off.
The lion's share of promoting Merc have air holes that can completely or partially get in touch. The holes allow exhaust their leaves in the borehole, which reduces the load on the engine and let it develop energy evacuate quickly. At higher speeds, such as reducing the pressure outlet resistance ineffectual.
But first make sure that the engine will make every effort to work with.
Then find the recommended rpm range at WOT to your engine. Do you want an accessory that makes it possible to operate in this area. In general, the pitch of a proposal inch, 2000 rpm fall to win and vice versa. Blade design makes a difference.
Keep the motor on the transom, one hole at a time until it is released or moves in the corners or lose water pressure. Superior remove the motor, it will be more RPMs in WFO. Get on the boat and motor out of the water means less friction and more speed.
Then you can raise the pitch at the speed of its time, the speed, where they belong.
Learn to Power Equipment: engine cut-off use start on the road. When you start the exit hole in the bow to fall - then you begin to cut a little at a time, give the boat a few seconds to respond. By increasing U / min instead of down, you have come at an optimal angle of cut flowers. Varies from day to day, depending on conditions (waves and mass balance, wind and currents, temperature, water, etc.), and the whole day, as required by the load of fuel.
Several combinations of propellers for various applications of the original is a multi-purpose equipment manufacturer if you do all the necessary specifications rpm and an SS-get proposal, which is a little better, depending on the shape, weight and use of boat is basically SS prop have a longer life.
Use the same height and diameter, as> it into the engine if it is true, RPM> Other RPM lower key go>
15x17
Post a Comment